|
Thousand
Oaks Dew Controller
Each
heater output is controlled independently and has a full
range of adjustment from 0-100%. This eliminates the problem of
overheating or not reaching desired temperature regardless of
heater size and combination. Green LED indicates unit is
receiving power and also serves as a low power warning in
"battery saver" mode. Each channel has it's own red
LED indicator. Compared to competitive models, it's like having
four units built into one box with advanced features. Unit is
small and lightweight measuring 5" x 2.5" x 1"
(127mm x 63 x 25). Supplied with 12' (3.65m) power cord and
cigarette lighter adapter.
|
Dew
Buster Dew Controller
Designed
for those who want the best. Built tough to last a lifetime.
Output jacks case mounted to prevent stress on circuit board.
Short protected outputs can't be damaged by a heater fault. Two
year warranty even covers damage from shorts and home-made
heaters.
Keeps optics near air
temperature to maximize telescope performance.
Doesn't waste battery
power, applies very little heat while the telescope is cooling
down, then increases heat as needed to maintain optics dew free |
|
Celestron
Dew Shields / Lens Shade
A
Lens Shade/Dew Cap is a tube designed to wrap around the front
end of your SCT telescope and reduce the amount of dew that
builds up on the corrector plate. It also serves as a Len Shade
by preventing stray light from falling on the corrector plate,
which greatly improves contrast.
Celestron offers a complete line of rugged, but soft Foamex
plastic lens shades that can be stored flat after usage. They
are made from a thicker material that won’t crack under
temperature extremes. The quality level is a step above all
others as all material is sewn (not glued) for a long life.
|